STK Professional Audio VM-11S DRV, Owner'S Manual, Page: 25 / 28

Ⅸ Specifications
VM-11TDRV＆VM-11SDRV
♪
Input specifications.
Input terminals
Actual Load
Impedance
For use with
nominal
Input level
Connector in mixer
Sensitivity
Nominal
(limit)
Max. before
clip(Main Out)
MIC IN (1-9)
LOW IMPEDANCE
4 kohms
600
ohms mic
-50 dBu
(2.45 mV)
±1 dB
-34 dBu
(15.5 mV)
XLR Jack
LINE IN (1-7)
LOW IMPEDANCE
4 kohms
600
ohms lines
-20 dBu
(24.5 mV)
±1 dB
-14 dBu
(154 mV)
Phone Jack
LINE IN (8-11)
LOW IMPEDANCE
4 kohms
600
ohms lines
-10 dBu
(245.0 mV)
±1 dB
-14 dBu
(154 mV)
Phone Jack
AUX IN 10 kohms
600
ohms lines
-10 dBu
(245.0 mV)
±1 dB
6 dBm
(1.5 V)
Phone Jack
TAPE IN 10 kohms
600
ohms lines
-10 dBu
(245.0 V)
±1 dB
6 dBm
(1.5 V)
RCA Jack
NOTE: (1) Sensitivity is the lowest level that will produce a full power output, or the nominal
output level when the unit is set to maximum gain.
(2) XLR connectors are balanced. Phone jacks are unbalanced.
♪
Output specifications.
Output terminals
Actual Load
Impedance
For use with
nominal
Output level(H)
Connector in mixer
Nominal Max. before clip
SPEAKER OUT 4 ohm
4 ohms SP 300 W (430 W) 330 W (440 W) Phone Jack
8 ohms SP 200 W (290 W) 220 W (300 W) Phone Jack
MAIN OUT 600 ohm 10k ohms lines
+4dBu
(1.2 V)
+20 dBu
(8.3 V)
Phone Jack
MONITOR OUT 600 ohm 10k ohms lines
+4dB
(1.2 V)
+20 dBu
(8.3 V)
Phone Jack
EFX OUT 600 ohm 10k ohms lines
+4dBu
(1.2 V)
+20 dBu
(8.3 V)
Phone Jack
TAPE OUT 600 ohm 10k ohms lines
-10dBu
(245 mV)
+12 dBu
(3.07 V)
RCA Jack
NOTE: (1) All connectors are unbalanced.
25