23
Ⅰ
Introduction
l
제품 소개
8.
Specifications
l
제품 규격
*Specifications are subject to change without notice.
NOTES :
Model
HVQ-131 Single 31band, HVQ-231 Dual 31band
Inputs
Connectors
Type:
Impedance:
1/4″TRS, female XLR (pin 2 hot), and barrier terminal strip
Electronically balanced/unbalanced, RF filtered
Balanced 40
㏀
, unbalanced 20
㏀
Outputs
Connectors
Type:
Impedance:
1/4″TRS, male XLR (pin 2 hot), and barrier terminal strip
Balanced/unbalanced, RF filtered
Balanced 120Ω, unbalanced 60Ω
System Performance
Bandwidth
Frequency Response:
Comp Limiter Threshold Range
20Hz to 20kHz, +0.5/-1dB
<10Hz to >50 kHz, +0.5/-3dB
Min 0dB through max 24dB Range(off position)
Noise Reduction In
Signal-to-Noise
Dynamic Range:
(+/-6 and +/-15dB Range):
>100dB, Unweighted, ref: +4dBu, 22kHz measurement bandwidth
>118dB, Unweighted
Noise Reduction Out
Signal-to-Noise
Dynamic Range:
(+/-6dB range):
>94dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
>112dB, unweighted
Noise Reduction Out
Signal-to-Noise
Dynamic Range:
(+/-15dB range):
>90dB, unweighted, ref: +4dBu, 22kHz measurement bandwidth
>108dB, unweighted
THD+Noise
<0.04%, 0.02% typical at +4dBu, 1kHz
<0.05% at 1kHz with 15dB gain reduction
Interchannel Crosstalk:
<-80dB, 20Hz to 20kHz
Noise Reduction
up to 20dB of dynamic broadband noise reduction
Function Switches
Noise Reduction
Activates Noise Reduction
EQ Bypass
Bypasses the graphic equalizer section in the signal path
Low Cut(Recessed)
Activates the 40Hz 18dB/octave Bessel high-pass filter
Range(Recessed)
Selects /-6dB or +/-15dB slider boost/cut range
Output Level Meter
4-LED bar graph (Green, Green, Yellow, Red)at -10, 0, +10, and +18dBu
Gain Reduction Meter
4-LED bar graph (all Red)at 0, 3, 6, and +10dB
Noise Reduction Indicator
1 LED: Yellow
EQ Bypass Indicator
1 LED: Red
Clip Indicator
1 LED: Red
Low Cut Indicator
1 LED: Red
AC Power Requirement
Power Consumption : 24VA
AC 100-120V (50-60Hz) : Fuse T125mA / 250V (HVQ-131)
AC 100-120V (50-60Hz) : Fuse T315mA / 250V (HVQ-231)
AC 220-240V (50-60Hz) : Fuse T160mA / 250V
IEC receptacle
Dimension (W×D×H)
Weight
lbs/Kg
482.5×197×88mm / 19×7.8×3.5 inch (HVQ-131)
482.5×197×132mm / 19×7.8×5.2 inch (HVQ-231)
4Kg / 8.80 lbs (HVQ-131)
6Kg / 13.20 lbs (HVQ-231)
http://stk.com.vn