Stiroplus SP 1024, Instruction Manual

Page: 12 / 16

11
Temperature dial
Turn the dial to set ironing temperature to meet the garment changed.
Temperature indicator
When the iron is heating up, the temperature indicator will be illuminated. Once the iron has reached the
selected temperature, it will extinguish. The indicator will be cycled on and off as the iron maintains the
selected temperature during ironing.
Steam trigger
After pressing down the steam station iron power switch and choosing the desired steam rate, it indicates the
steam can be used for ironing until the steam rate indicator is changed flashing to illuminating. At this time,
grab the steam trigger with a little force and slide the iron backward, the steam will come out of the soleplate
continuously. When loosen the steam trigger, the appliance can only be used for dry ironing without steam.
Lack of water indicator
If less water in the tank, the indicator will be illuminated, following with two beeps can be heard, the steam
generator stops working. It prompts you need to add water into the tank.
Descaling indicator
If the descaling indicator illuminating, it indicates the steam generator shall be cleaned by virtue of the
mineral deposits collecting to a degree. When the system ensures the mineral deposits have been removed,
the indicator will be extinguished.
Drain water cap
Rotate the drain water cap manually to open it for cleaning the steam generator (see Fig. 1).
Cord clamp
When not in use, the steam supply hose and power cord shall be stored. Pull out the cord clamp first, after
winding the cord around the cord winding groove, push the cord clamp back.
BEFORE FIRST USE
1. Remove any sticker, protective foil or storage cover from the soleplate.
2. Heat up the iron to maximum temperature and iron over a piece of damp cloth for several minutes for the
purpose of removing any residue on the soleplate according to the section of “Steam ironing”.
NOTE: It is normal that strange odor comes out from the unit for the first use. This will cease
after a short while.
NOTE: Some particles may come out of the soleplate when you use the iron for the first time.
This is normal; the particles are harmless and stop coming out of the iron after a short while.
NOTE: When you switch on the appliance, the steam generator may produce a pumping
sound. This is normal; the sound tells you that water is pumped into the steam generator.
NOTE: During the heating process of the soleplate, there will be little steam coming out from
the soleplate automatically and this phenomenon will continue for about 3 seconds, This is
normal.
USING YOUR STEAM STATION IRON
The appliance has two iron portions. You can use dry ironing or steam ironing. The details refer to the
following:
Dry ironing
1. Put the iron on the thermal insulating cushion.
2. Connect the plug to wall outlet, together with one beep can be heard. And then press down the Power
button, the power indicator starts to illuminate.
3. Turn temperature dial to your desired setting, which is depended on the fabric of garment, and the
temperature indicator will illuminate. Refer to IRONING TIPS latter. The iron starts heating.
4. When the temperature indicator turns off, the selected temperature is reached. You now can start ironing.
WARNING: Never touch hot soleplate at any time before cooling down!