16
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: W60B2A411B PRODUCT CODE: 48538 08/2015
Connecting the drain hose
Connect the water drain hose to the drain pipe connector on the back of the dish-
washer and the other end to a drain pipe (
Ø
≥
40mm). Do not bend or crimp the hose.
Follow the illustration below (Fig. 7) when installing the waste connection. It must be at
a height between 400mm (minimum) and 1000mm (maximum). The water drain hose
should be fixed tightly. (If you need to drain any excess water from hoses and the sink
is higher than 1m from the floor, you will need to drain the excess water into a bowl or
container held underneath the pipe and lower than the sink.)
Fig. 7
Sink
Outlet hose
Installation (Cont.)