11
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: W60B2A411B PRODUCT CODE: 48538 08/2015
Installation
Positioning the appliance
This dishwasher is designed for fully integrated installation (see page 13). Position
it close to an existing water inlet and drain connection, and make sure there is a power
point nearby, or in an adjoining cabinet. The back of the appliance should face against
the wall behind it and the sides along any adjacent cabinets or walls (Fig. 1).
The dishwasher’s water supply and drain hoses can be positioned either to the right or
left sides to facilitate proper installation.
Make sure the appliance does not stand on any water hoses or the power cable.
Fig. 1
Connectors for
power cord and
inlet/outlet hoses
Install the dishwasher into the cabinet
600mm min.
Unpacking the appliance
• This product has been packaged to protect it against transportation damage.
Unpack the appliance but keep all packaging materials until you have made sure
your new dishwasher is undamaged and in good working order. The carton is
recyclable. Whenever possible, reuse the carton and recycle it when disposing of
the packaging materials.
• Plastic wrapping can be a suffocation hazard for babies and young children, so
ensure all packaging materials are out of their reach, and dispose of them safely.
• Unwind the cord to its full length and inspect it for damage. Do not use if damaged.
In case of damage, contact our after sales support line for advice.
DANGER!
Make sure your electrical power is disconnected before installing the
dishwasher. Failure to do so can result in death or electrical shock.
ATTENTION!
All relevant pipes and electrical equipment should be installed by
professional plumbers, electricians or dishwasher installers. Make sure
to use new water supply and drain hoses. Do not use old hoses.
ATTENTION!
Read this manual to familiarise yourself with all parts and operating
principles. Pay particular attention to the safety instructions.