9
Getting Started
Before first use
• Unpack the appliance but keep the original packaging materials in a safe
place. It will help prevent any damage if the product needs to be transported in
the future, and you can use it to store the appliance when it is not in use. In the
event that the carton is to be disposed of, please recycle all packaging materials.
Plastic wrapping can be a suffocation hazard for babies and young children, so
ensure all packaging materials are out of their reach and disposed of safely.
• Inspect the cord and plug for damage or wear before each use. Do not use
the appliance if the appliance or its cord have been damaged or are not working
properly. In case of damage, contact the after sales support line.
• Read all instructions and make sure you understand all warnings. Refer to the
Product Overview, pages 7–8, to familiarise yourself with the product and its parts.
• Remove and wash the water tank (see page 12), porta filter and filters, drip tray
and drainer, and the measuring spoon in warm water and a little mild detergent
to remove any dust from transport. Rinse and dry each part thoroughly, then refit
the drip tray and drainer. Wipe the steam wand clean.
• Flush the internal brewing system as follows:
1. Fill water into the container (see page 12 for details).
2. Put a filter into the porta filter – without any ground coffee at this stage –
and engage it onto the group head (see page 11 for details).
3. Place a larger container underneath the outlet openings.
4. Plug the machine into a wall outlet and set the hot water/steam selector to
the HOT WATER position (button released).
5. Press the ON/OFF button to turn the appliance on. As soon as the HEATING
light goes out, set the function dial to the
position and hot water will start
flowing from the outlets.
6. While watching the container so it does not overflow, leave the pump
running until about half the water has passed through. Then turn the
function dial to the neutral position to switch off the pump.
7. Empty the hot water out of the container and place it under the steam wand.
8. As soon as the heating light goes out, turn the function dial to the
position.
CAUTION:
Take care, steaming hot water will start flowing from the
steam wand, and there may be some splattering!
9. While watching the container, let the water pass through until the amount
left in the container has reached the MIN mark.
10. Then turn the function dial to the neutral position to switch off the pump.
• Follow this same procedure if the appliance has not been used for a week, or
for a longer period of time.
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: TK-1818R2A-WHT PRODUCT CODE: 58170 08/2017
