15
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: STR-BGC PRODUCT CODE: 60165 06/2018
Fig. 5
Sealing tape
(A) Screw
(B) Mounting
bracket
Installation (Cont.)
• Place a mounting bracket over the hole that matches the size of the
screws
—
there are appropriate screw holes in each corner of the hob.
• Insert a screw (A) through the mounting bracket (B) and slightly tighten it
so that the bracket is attached to the cooktop, but you can still adjust its
position (Fig. 5).
• On the underside of the cooktop, adjust the mounting brackets into a
position that is suitable for your benchtop. Then fully tighten the screws
(A) to secure the cooktop into position.
Electrical connection
• Connection:
The appliance is equipped with an electrical cord and
power plug, which must be connected to the mains electricity supply
in order for the ignition to work. Insert the power plug firmly into an
appropriate electrical outlet and switch on power at the outlet.
• Wall socket:
The electric wall outlet must be properly earthed and
accessible. It must be suitable for the power drawn by the appliance.
The outlet voltage and circuit frequency must correspond to the voltage
stated on the appliance rating label.
• Power cord:
When installing the appliance, make sure that the power
supply cord does not come into contact with any parts of the cooktop
that get hot during use, or with hot cookware. If the supply cord is
damaged, it must be replaced by the manufacturer or a similarly qualified
person in order to avoid a hazard.
