23
MODEL: STL95 | PRODUCT CODE: 57475 | 07/2017
Care and Cleaning Cont.
Drain pump maintenance
We recommend that you clean the drain pump filter regularly (at least once a month) to avoid blockages
created by bobby pins, coins and excess lint.
Proceed as follows:
1. Disconnect the washer from the power source.
2. If necessary, wait until the water has cooled down.
3. Place a container underneath the pump opening to collect any spillage (see below, left).
4. Turn the filter cap anticlockwise to take it out gently (see below, right). Always keep a rag nearby to dry up
water spillage when removing the pump filter.
5. To remove any objects from the filter, wash it thoroughly in a basin or under running water (see below,
left).
6. Put the cap back and place the filter back in its seat (see below, right).
Note: The drain pump is located at the rear of the machine as illustrated on Fig. 3, page 11.
