30
After Sales Support
Telephone:
1300 886 649
Email:
Rangehood Installation (Cont.)
Installation in ducted mode
• Drill 4 holes of Ø8mm on a suitable place 38mm down from the top of the
unit, as illustrated in Fig. 2 below.
• Insert the wall plugs into the holes, then insert two ST4x30mm screws
into the lower wall plugs and tighten the screws. Insert two ST4x30mm
screws into the upper wall plugs with two small L-shaped brackets.
• Hang the rangehood onto the fixed screws (Fig. 3).
• Fasten the L-shaped brackets on the casing using two M4x10mm screws.
• Attach the supplied ducting pipe to the air outlet on top of the rangehood,
then lead the other end of the ducting pipe through the wall opening.
Fig. 3
Fig. 2
60cm
