13
After Sales Support
Telephone:
1300 886 649
Email:
Other Useful Information
CAUTION!
Before carrying out any maintenance or cleaning work,
make sure the temperature control is turned to the off position [ 0 ]
and your refrigerator is disconnected from the power supply.
Cleaning the refrigerator
•
Inside:
Wipe the inside with a soft cloth, dampened with water — do not
flush it with water. If required, use a mild detergent, or a warm water and
baking soda solution (2 tablespoons of baking soda to 1 litre of water).
•
Outside:
Clean the outside with mild detergent and warm water, dry
thoroughly.
•
Do not use:
The following substances may damage the finish and the
plastic surfaces: harsh (alkaline) detergents, toilet cleaner, abrasive
powders, hot water, acetone, toluene and most organic solvents etc.
•
Accessories:
If required, disassemble removable accessories before cleaning.
•
Door seals:
Wipe dust and spills off the rubber door seal. Spilled liquids may
cause corrosion, leading to air leakage and increased power consumption.
•
Electrical parts:
Only use a dry cloth to clean any electrical parts such as
the lamp and temperature control knob.
•
Freezer cleaning:
When removing frozen food packages before cleaning
the freezer compartment, take care your hands are dry, as wet hands may
freeze and stick to frozen packages.
•
Power cord:
After cleaning the refrigerator, make it a habit to check the
cord and plug for any damage and ensure the unit is installed properly.
•
Defrosting:
This refrigerator is frost-free, manual defrosting is not required.
WARNING:
Do not use any equipment or method to accelerate the
defrosting process, as it may destroy the cooling system.