17
po.org
MODEL: FS1-40DCWIFI PRODUCT CODE: 706541 10/2021
AFTER SALES SUPPORT
info@tem
AUS
1300 112 534
po.org
AFTER SALES SUPPORT
info@tem
AUS
1300 112 534
IMPORTANT!
Before you can control your fan remotely with its
in-built Wi-Fi technology, you must reset the Wi-Fi
module. To do so, proceed as follows:
• Unplug the fan for 10 seconds, then
reconnect the power supply.
•
To reset the Wi-Fi module, press the
SWING button on the fan’s control panel
and hold it for 5 seconds until it beeps.
• When the Wi-Fi indicator on the control panel
is blinking rapidly (WF10), the Wi-Fi module
is ready for configuration with your mobile
phone.
Fig. WF10
- -
Fig. WF8
Fig. WF7
• Once you have registered and entered your email address, tap
[ Get
Verification Code ] and an email will be sent directly to the email account
that you entered when registering. Enter this verification code.
• Now you have to enter your password and tap
[ Done ] (Fig. WF7).
• You will now enter the main device list (Fig. WF8). Tap
[ + ] or [ Add
Device ] and add your device from the product list (Fig. WF9).
Wi-Fi Control (Cont.)
Fig. WF9