11
po.org
MODEL: FS1-40DCWIFI PRODUCT CODE: 706541 10/2021
AFTER SALES SUPPORT
info@tem
AUS
1300 112 534
po.org
AFTER SALES SUPPORT
info@tem
AUS
1300 112 534
Getting Started (Cont.)
Assembling the fan body and base
Using Fig. 1, above, to guide you, assemble the fan as follows:
1. Loosen the screw from the tube and connect the tube with the main body,
then fasten the screw.
2. Assemble the main body into the cover tube and connect the two pieces.
3. Remove the lock nut from the tube. Turn the base parts over, place the
silver-coloured cover on top, then place the base parts over the tube.
Affix the fan body to the base using the lock nut at the underside of the
weighted base, tightening it securely.
4. Tighten the height adjustment screw at a comfortable height for attaching
the fan head.
Main body
Screw
Extension pole
Cover tube
(white metal)
Tube base
(silver-coloured cover)
Weighted stand
base and plastic
cover
Lock nut
(attached to the end of the tube)
Fig. 1