AFTER SALES SUPPORT
1300 300 018
AUS Hotline Costs
10
MODEL: PRI40LP PRODUCT CODE:51578 03/2016
Power Requirements
The Fridge/Freezer is designed to operate on AC or DC voltage.
• AC input 220-240V AC at 50Hz (e.g. electrical power point)
• DC input 12V or 24V DC (e.g. car cigarette lighter or car battery)
General
• If the Fridge/Freeze is operating when the vehicle ignition is switched OFF,
the Fridge/Freezer will switch OFF automatically when the power source
voltage falls below the Battery Monitor cut-out setting.
• The Fridge/Freezer will automatically switch back ON when the vehicle
is re-started and the power source voltage reaches the Battery Monitor
cut-in setting.
DC Connection
• Plug the 12V/24V DC power cable into the DC POWER socket (as circled
above) at the rear of the Fridge/Freezer and then connect to the vehicle
cigarette lighter socket or suitable 12V or 24V DC power source.
• For optimum performance and efficiency, it is important that the Fridge/Freezer
has a reliable DC power source available. Direct connection to the battery is
recommended and reduces the risk of voltage dropping to the appliance.
• Use only the 1.5m DC power cable supplied with the Fridge/Freezer. If you
require an extension cable, please see Page 10 for further information.
NOTE:
It is important that the correct cable size and gauge is used for the
installation of the DC supply as over distance the voltage can decrease
if the incorrect cable size and gauge cable is being used.
Operating your Fridge/Freezer 12V DC
NOTE:
The Fridge/Freezer is equipped with an electronic control system that will
prevent polarity reversal. In the event that the battery connection is reversed
the unit will not start or operate. The power input socket is fitted with a 15A
blade fuse for protection.