Stinson SR 9, Instruction Manual

Page: 8 / 18

Rudder Installation
Drill holes for the mounting screws. Fit the servos as shown with
the servo label facing the rudder. Harden the area around the
holes with a drop of thin CA
Use brass crimps on eachcable and thread, the cablethrough the
end of thepull-pull connector.
Crimp the brass tube with acrimping tool or pliers
A drop of thin CA may be applied to the brass tube to help secure
the cable
Install the rudder ball linkswith bolts and locking nuts.
Check the pull-pull cables. Rudder and the rudder servo should
both be in the neutral position.