5
Caster
Stem
Caster
Ball
Socket
Dust
Drum
Caster Assembly
With the power head and lid assembly
removed from the drum, and the drum
upside down on the floor:
1. Insert the caster stem into the socket
of the drum, as shown (4 places).
2. Push on the caster until the ball on the
caster stem is inserted all the way into
the socket. You will hear the ball snap
into the socket and the caster will
swivel easily when positioning is
correct.
3. Turn the drum upright.
Wet/Dry Vac Assembly
1. Line up front of power head assembly
with vacuum port located on the front
of the drum, as shown.
2. Place power head assembly on top of
drum.
3. Be sure lid completely covers the top
of the drum so leakage does not
occur.
4. Push down on top of the drum latch
areas to cause the flexible locking
tabs to hook onto the drum channel.
5. Make sure that the locking tabs are
snapped in place to prevent the lid
from coming off. (See inset).
Top
Assembly
Drum
Channel
Push
Down
Push
Down
Drum
Out
Flexible
Locking Tab
Pull Out
Flexible
Locking
Tab
SP6928 Stinger 7/30/141_SP6568-2 Stinger.qxd 8/7/14 8:55 AM Page 5
