background image

10

CLEANING TIPS – 

continued

OPTIONAL CLEANING

Optional cleaning accessories are available to further enhance your cleaning capabilities:
See your retailer or call 1-800-465-4980 for more information.

• Rotating Wash Brush
• Wash Brush
• Underbody Wand
• Pipe Drain Cleaner

• Sandblasting Attachment
• Water Pumping Kit
• Water Siphon Kit
• 25’ Extension Hose

CIP S.p.A. warrants to the original owner that this product shall be free from defects in material
and workmanship for one year from the date of its original purchase.If such a defect appears
during the warranty period, upon presentation of proof of purchase, CIP S.p.A. will repair or
replace (at its option) your product without charge.

This warranty does not cover accidental damage, unreasonable use, normal wear and tear, loss
of use or other consequential damages, nor does it cover repairs made or attempted by
unauthorized persons.

Please note that no returns will be accepted without prior authorization from our customer
service department.

It is the owner’s responsibility to file claims for damage caused by public transportation carriers
directly with the carrier concerned.

STINGER 1 YEAR WARRANTY

CIP S.p.A.
Via Cà Rossa, n.1
I-46026 Quistello (MN)

Patio & Lawn Furniture

(with or without detergent)
Pre-rinse furniture and surrounding area with
fresh water. If using  Pressure Wash, place
detergent suction tube directly into cleaning
solution and apply to surface at low pressure.
Allow detergent to remain on surface 1-3
minutes. Do not allow detergent to dry on
surface. If needed use special Wash Brush
attachment to remove stubborn dirt. Rinse at
high pressure in a sweeping motion keeping
the spray nozzle approximately 3-6 inches
from the cleaning surface. For best results,
clean from top to bottom and from left to right.
Caution: Do not use the rotary nozzle on
patio or lawn furniture as it may cause
damage.

Barbecue Grills, Outdoor
Power Equipment &
Gardening Tools

(with or without detergent)
Pre-rinse cleaning surface with fresh water. If
using Pressure Wash or Degreaser, place
detergent  suction tube directly into cleaning
solution and apply detergent at low pressure.
Allow  detergent to remain on surface 1-3
minutes. Do not allow detergent to dry on
surface. Rinse at high pressure keeping the
spray nozzle approximately 3-6 inches from
the cleaning surface. For removing extremely
stubborn dirt, it may be necessary to move
the spray nozzle even closer to the surface
for greater dirt cutting action. To remove
caked on mud from garbage cans, lawn
mower blades, wheel barrels or other non-
sensitive metal surfaces, you may want to use
the Rotary Nozzle.
Caution: Do not use the rotary nozzle on
cloth, plastic or other sensitive surfaces
as it may cause damage.

Summary of Contents for High Pressure Washer













Reviews: