15
SRK-RAM13H PAC Integration Kit |
RAM Truck
Factory Amplified System Settings
Note: The factory sound system crossover and time correction points are pre-tuned from the factory and
saved on the factory amplifier and cannot be changed.
When the SRK-RAM13H is installed in a RAM Truck with a factory amplified system, crossover and time
correction adjustments will not be available by default. If any adjustments are needed for either settings,
the ”Factory Amplifier” setting will need to be set to “OFF”.
Follow the instructions below to set the factory amplified system tuned to the recommended settings.
1. Turn the factory amplifier “OFF”. Access the Installer Settings then Advanced Vehicle Settings >
Vehicle Audio Settings > Factory Amplifier (OFF)
2. Now with the Crossover setting available set the Level for Front and Rear to -3
Home > Settings > Audio Settings
