7
4A
4B
4C
4D
6
The display can be installed Flat or with a Horizontal Angle towards the driver. For flat mounting,
attach the Clamp Assembly (1) to the display using M4 X 14 screws
(FIG. A)
. If a horizontal angle
is desired, insert the Angle Plate (2) in between the clamp and display and replace 2 of the M4 X
14 screws with longer M4 X 18 screws on the thicker side of the angle plate
(FIG. B)
. Center the
bracket on the back of the display as a starting point, and if needed you can adjust up or down.
M4 X 18
(2X)
M4 X 14
(2X)
M4 X 14
(4X)
FIG. A
FIG. B
2
1
1
3
TOP
Single DIN Applications:
For Single DIN
installations, the
Plastic Dash Mounting
Bracket
will be mounted in the dash kit
the dash kit and the
Radio Module
will be
mounted remotely. Before beginning the
installation, determine where the
Radio
Module
will be installed and make sure the
Display Cables are long enough. Longer,
5 foot cables are available (SE-1501 &
SE-1502).
Plastic Dash
Mounting Bracket
Single DIN ISO Dash Kit
(Not Included)
M4 X 12
(4X)
No Horizontal Angle
With Horizontal Angle
Double DIN Applications:
Attach the
Metal
Bracket
to the
Plastic Dash Mounting Bracket
using M4 X 6 screws. Attach metal bracket and
plastic dash mounting bracket assembly to the
Radio Module
using M4 X 6 screws.
2
M4 X 6
M4 X 6
Metal
Bracket
Radio
Module
Plastic Dash
Mounting Bracket
Optional
Cable Channel
Pre-Assembly
Display Assembly
Multiple Mounting Options
ELEV8 can be configured for different mounting applications:
See Stinger website for TECH TIPS on vehicle specific installations.
Using a Double DIN Dash Kit (PAGE 8)
Using a Double DIN Sub-Dash Kit (PAGE 10)
Using a Double DIN Factory Radio Mounting Brackets (PAGE 12)
Using a Single DIN ISO Mountable Dash Kit, relocating Radio Module (PAGE 14)
Custom Mounting Applications.
TOP
Always ensure TOP indicator on the Clamp Assembly is facing UP.
