4
5
M4 X 6 M4 X 10 M4 X 12 M4 X 14 M4 X 18
#10 X 3/8 M5 X 10
NOTE: Depending on the
installation, not all screws
will be used.
Parts List
Hardware Guide
Optional Accessories
(SOLD SEPARATELY)
QTY
DESCRIPTION
PART NO
1
Touch Panel Display
UN1880-D
1
Radio Module
UN1880-M
Mounting Brackets / Hardware
1
Plastic Dash Mounting Bracket
SE-1000
1
Display Mounting Clamp
1
Metal Mounting Bracket
1
Horizontal Display Angle Plate
1
Rubber Boot
SE-1001
4
M4 X 6 Screw
SE-1002
4
M4 X 10 Screw
4
M4 X 12 Screw
2
M4 X 14 Screw
2
M4 x 18 Screw
6
M5 x 10 Screw
6
#10 x 3/8 Screw
2
Backstrap
SE-1003
Cables / Harnesses
1
8 Pin Display Power Harness
SE-1100
1
LVDS Display Video Cable
SE-1101
1
16 Pin Power / Speaker Harness
SE-1102
1
24 Pin AV / Rear Camera Harness
SE-1103
1
10 Pin Multi Camera Harness
SE-1104
1
6 Pin SWI / IR Harness
SE-1105
1
4 Pin Mic / Camera Audio Harness
SE-1106
1
SiriusXM Cable
SE-1107
1
External Microphone
SE-1108
1
GPS Antenna & Mounting Plate
SE-1109
DESCRIPTION
PART NO
IR Remote Control
SE-1500
8 Pin Display Power Harness - 5FT
SE-1501
LVDS Display Video Harness - 5FT
SE-1502
PAC Dash Mount HDMI & USB Extension - 3FT
HDMI-USB-CBL
PAC Dash Mount USB Adaptor - 3FT/6FT
USDMA3 / USBDMA6
iGO North American Map (Micro SD Card)
SE-P14
Note: The 2 Backstrap (SE-1003) can be used in some applications to
add additional support or used in custom installations. The backstrap
may mount to the sides of the radio chassis using the provided screws
in the existing mounting locations or can be mounted directly to the
Plastic Dash Mounting Bracket.
Remove the clamp assembly from the plastic
mounting bracket by pushing up from
compression spring side (1) and swing out to
unhook top (2).
1
1
2
Compression Spring
