background image

©  stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid  •  Tel. +49 (0) 2689 92790-0  •  All rights and product modifications reserved.

State: 12/2013 · S. 3

Mounting instructions for „Rudder trainer“ 

Item-No. 551114 401

5.  After the setting period of 8 -10 days - depending on weather conditions and 

foundation size - place the sports equipment onto the foundation and anchor 
with the included heavy-duty dowels.

6.  Do not allow to use the equipment before the installation has been finished.  

7.  Attention:

 If the fitness equipment has been incompletely installed or partly 

dismantled when carrying out maintenance and repair work, this may lead to 
particular risks of injury for the user. For this reason, make clearly visible that 
the equipment shall not be used in such cases. 

8.  NOTE:

 Fitness equipment, which contain components made of stainless 

steel should not come with „normal“ steel parts in contact. Those steel parts 
may rub off and leave small steel particles in combination with moisture 
brown rust stains.If such corrosion occur on stainless steel parts, they are 
fine with an abrasive (240 grit) to remove. 

 

Please take care when transporting and setting up the fact that the compo-
nents are made of stainless steel with no „normal“ steel parts in contact. 

9.  Because of the risk of injury, the fitness information sign has to be arranged 

outside of the minimum zone.

Diagram 3: Top view „Rudder trainer“

2000

Grundfläche

Mindestfreiraum = Sicherheitsfreiraum

Mindestfreiraum= ø2000mm

Rev.:

Projekt:

BESTELL-NR:

ZG-NR:

BENENNUNG:

OHNE SCHRIFTLICHE ZUSTIMMUNG DER C KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT 

NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET 

WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.

FREIG:

GEPR:

GEZ:

DATUM:

NAME:

WERKSTOFF



MAßSTAB:

OBERFLAECHEN NACH

DIN ISO 1302 REIHE 2

ZUL. ABWEICHUNG

DIN 2768 - mH

+0,3

-0,3

WERKSTUECKKANTEN

NACH DIN 6784

Gewerbegebiet Larsheck

56271 Kleinmaischeid

Deutschland

A3

0045-00-00

10.03.2015

Abmaße:

Fertigung:

M.Boehm

1x

Gewicht:

Rudertrainer

Rudertrainer

Mindestfreiraum

Extent of the 

minimum zone = 

safety area

Summary of Contents for Rudder trainer

Page 1: ...et Larsheck 56271 Kleinmaischeid Tel 49 0 2689 92790 0 All rights and product modifications reserved State 12 2013 S 1 Mounting instructions for Rudder trainer Item No 551114 401 Diagram 1 Overall view of the fitness equipment ...

Page 2: ...synthetic fall surfacing is recom mended 3 Carry out excavation work for the foundation anchor as shown in Diagram 2 After excavation compress the foundation floor Note The fitness equipment is built in on the play level 4 Set up the concrete foundations acc to the dimensions indicated LxBxH 1300 x 1300 x 400 mm with central horizontal reinforcement BST 500 S in the quality class C 20 25 1300 150 ...

Page 3: ... with moisture brown rust stains If such corrosion occur on stainless steel parts they are fine with an abrasive 240 grit to remove Please take care when transporting and setting up the fact that the compo nents are made of stainless steel with no normal steel parts in contact 9 Because of the risk of injury the fitness information sign has to be arranged outside of the minimum zone Diagram 3 Top ...

Page 4: ...ing products nor scouring powder bleaching or silver polish cleaner Cleaning intervals depend on type and degree of soiling as well as on demands made on optical characteristics Therefore cleaning is advisable at intervals of six to twelve months whereby in the case of strong soiling it is appropriate to clean the playground equipment at intervals of 3 to six months General Information DIN 79000 2...

Reviews: