Stillwater Designs KICKER 19119147, Installation Manual

Page: 7 / 8

7
Symptom Possible Cause Solution
No Subwoofer Output
Fuse not installed in inline fuse
holder on subwoofer and / or amp
harness Install fuse(s) into fuse holder(s).
Refer to instructions for correct
placement
Low battery voltage Recharge the battery
Negative battery cable not
connected Reconnect negative battery cable
Power wire connector not
connected to body harness Connect power wire to body
harness. Check for loose connec-
tion
Ground wire not grounded properly Check ground wire with voltmeter to
insure it is a good ground
Signal input connector not
connected properly Connect signal wire of subwoofer
harness to signal wire of amplifi er
harness. Check for loose
connection
Balance or fader controls not set to
neutral position Set balance and fader control to
center settings.
No low frequency information in
music Test with several different songs
Subwoofer harness not properly /
completely connected to subwoofer. Securely fasten both of the
connectors on the subwoofer
harness to the subwoofer. Check
for loose connections.
Radio Not Coming On
Radio connector not properly /
completely connected Check radio connector to insure it is
completely seated
Blown radio fuse Refer to owner's manual for radio
fuse location and value
Low battery voltage Recharge the battery
Radio Comes On, But No Sound
From Any Speakers
Fuse not installed in inline fuse
holder on amplifi er harness Install fuse into fuse holder. Refer to
instructions for correct placement
Radio connector not
properly / completely connected Check radio connector to insure it is
completely seated
Ground wire not grounded properly Check ground wire with voltmeter to
insure it is a good ground
Low battery voltage Recharge the battery
stillwater
designs
P.O. Box 459 • Stillwater, Oklahoma 74076 • USA • (405) 624–8510