STILLA S3041, Assembly Instructions Manual

Page: 9 / 60

8 | P a g e
STEP 2.0
WALL ASSEMBLY
WALL PANEL (WP) (900MM WINDOW PANEL) CAN BE POSITIONED ANYWHERE ON THE
SHED WHERE WE HAVE USED A (P) (900MM WALL PANEL).
2.0 - ASSEMBLY PARTS – WALL ASSEMBLY
PART CODE QTY DESCRIPTION
FP 1 Front wall panel
P 1 900mm Wall panel
65HHS 3 65mm Hex head screw
2.0 - ASSEMBLY – WALL ASSEMBLY
Screw through FP into P (top, centre & bottom) using 3 x 65HHS. (Holding studs flush on the
outside ). Ensure Cedar Strip is on door side. Note: Ensure tongue on cedar cladding is at
top.
P
Screw 3 x 65HHS (Top,
centre & bottom)
FP
When screwing the four corners together please
make sure the studs are flush on the outside (not
the inside) as per image below.
Cedar Strip