Still SU-20, Original Instructions Manual

Page: 69 / 86

Maintenance
5
Maintenance as required
12
2145
– Place the manufacturer-approved battery
side removal roller unit next to the truck
(8); position it so that it is still and stable;
adjust the height of the roller unit so that it is
level with the underside of the battery at the
battery compartment.
DANGER
"Risk of crushing hands" as indicated by the two
stickers (13). The battery must be removed by
a single operator only. The operator must follow
the operating instructions given in this section,
positioning himself on the same side as the battery
side removal roller unit.
– Place a hand inside the appropriate battery
slot (12) as shown in the illustration.
– Pull the battery (9) from the inside towards
the outside, sliding it along the rollers on the
chassis and positioning it on the previously
prepared external roller unit.
2137
10
10
9
– Hook the battery at the two points (10) with
a sling or chain.
– Lift the battery and remove it.
DANGER
Use a crane with a suitable lifting capacity for the
weight of the battery. The lifting operations must be
performed by qualified personnel. DO NOT stand
within the crane’s radius of action or near the truck.
Use NON METALLIC slings. Make sure that the
lifting capacity of the slings is suitable for the weight
of the battery.
– Change the battery and fit the new one
using the new previously prepared external
roller unit.
CAUTION
To decide which type of battery to use, check the
table provided in the "Technical Data" section.
– Place a hand inside the appropriate battery
slot (12).
45418043404 [EN] 63