5
Maintenance
Chassis, bodywork and fittings
To perform the operations described below,
the electrical supply to the tow tractor must be
cut off:
– Immobilise the tow tractor
– Switch off the ignition, and remove the key
– Press the emergency stop button
– Open the battery compartment door
– Unlock the battery
– Remove the battery from its compartment
using a suitable tool
Gel battery
– Check for traces of sulphate in the compart-
ment and frame
– If there is only minimal sulphate build-up,
just wipe the top of the cells with a damp
cloth
– If sulphate build-up is substantial, you must
jet wash the battery and clean the frame
Lead battery
– Check that there is no electrolyte in the
bottom of the compartment. To do this,
connect the suction bulb supplied with the
battery to the plastic plunger tube
– Pump off any electrolyte that may have
spilled between the cells
– Clean the top of the cells with a damp cloth
CAUTION
In the event of substantial sulphate build-up or
excessive electrolyte spillage, please contact the
after-sales service department as soon as possible.
After these checks have been performed,
please lock the battery correctly and close the
battery compartment door.
132
1191 801 15 51 EN - 09/2019
Summary of Contents for LTX 70
