Still HPT 10 XE, Original Instructions Manual

Page: 80 / 100

6
Maintenance
Maintenance after 3 months
HPT10_047
3
– Remove filler cap (3).
– Check the oil level.
The oil level must lie at approx. 20 mm below
the upper edge of the oil tank.
– If necessary, top up with hydraulic oil of the
corresponding specification, see ⇒ Chap-
ter "Maintenance data table", P. 6-62.
– Fit filler cap (3).
– Attach plastic covering (2).
– Screw in screws (1).
Checking the electrical connections
at the pump motor, HPT 10 XE
– Check the mountings, condition and insula-
tion of the wiring at the pump motor.
HPT10_043
NOTE
Oxidised connections and faulty wiring lead to
voltage drops causing disturbance.
– Remove any traces of oxidation and replace
faulty cables.
72 50988046052 EN - 10/2018