Still FXD 20 Original Instructions Manual Download Page 46

Page: 46 / 162

–

Push the joystick to move the truck for-

wards.

–

Push the joystick in the opposite direction.

The truck brakes progressively and then

moves off in the opposite direction until the

desired speed has been reached.

NOTE

Also ensure that the stabiliser wheels operate

correctly. This influences braking effective-

ness.

Braking with the single-pedal option

Braking using the brake pedal

–

Toggle the drive switch and press the accel-

erator pedal (2) to move the truck forwards.

–

Press the brake pedal (1).

The truck brakes progressively until the truck

comes to a complete stop.
Braking by releasing the accelerator pedal

–

Use the drive switch located on the joystick

to set the direction of travel.

–

Press the accelerator pedal (2) to move the

truck forwards.

–

Release the accelerator pedal.

The truck brakes progressively until the truck

comes to a complete stop.
Braking by reversing the drive direction

–

Toggle the drive switch located on the joy-

stick to set the direction of travel.

–

Press the accelerator pedal (2) to move the

truck forwards.

–

Move the drive switch in the opposite direc-

tion.

–

Keep the accelerator pedal depressed.

The truck brakes progressively and then

moves off in the opposite direction until the

desired speed has been reached.



Use

Checks and actions prior to commissioning

11648011751 EN - 02/2021 - 06

Summary of Contents for FXD 20



































































































































































Search results

Summary of Contents for FXD 20

Reviews:

Related manuals for FXD 20

Brands by name

Popular brands

Still FXD 20, Original Instructions Manual

Search results

Summary of Contents for FXD 20

Reviews:

Related manuals for FXD 20

Brands by name

Popular brands