Still ECV 10, Original Instructions Manual

Page: 79 / 106

of the truck and the efficiency of the protective
installations in accordance with the technical
regulations and principles established for
checking industrial trucks.
Battery maintenance staff
Batteries must only be recharged, maintained
and changed by specially trained personnel.
Personnel must follow the manufacturer’s in-
structions of the battery, the battery charger
and the truck.
It is essential to follow the battery mainte-
nance instructions and the battery charger op-
erating instructions.
Maintenance operations that do not require special training
Simple maintenance operations such as
checking the hydraulic fluid level or checking
the battery electrolyte level can be carried out
by persons with no special training.
A specific qualification is not necessary.
Complicated maintenance operations such as
replacing the battery, replacing the wheels
and so on should be carried out by the author-
ised service centre.
Refer to the maintenance section of this man-
ual for further information.
Technical inspection and maintenance data
Assembly Item/oil Capacity/standard value
Main hydraulic circuit
Hydraulic oil 3.8L to 4.8L
Pressure max. 150 bar
Brake system Electromagnetic brake air gap 0.2 mm to 0.4 mm
Fuses
FU01 150 A
FU02 10 A
Maintenance - 1000 hours / every 12 months
At operating hours
1000 3000 5000 7000 9000
11000 13000
Carried
out
 
Functions and controls
Check fault information record and run time.
Check that cables are free from damage and that terminals are firmly attached.
Maintenance
5
Maintenance - 1000 hours / every 12 months
71 50028011505 EN - 03/2022 - 06