–
To facilitate movement over obstacles, in-
crease the ground clearance.
–
Check that the width of the load is compati-
ble with the width of the aisle.
Setting a load down on the ground
–
Carefully move the load into the deposit
area.
–
Lower the load until the fork arms are free.
–
Move the forks straight back.
–
Lift the forks a few centimetres again.
CAUTION
Be careful not to touch nearby loads or those behind
the equipment.
CAUTION
Do not touch nearby loads or loads positioned be-
hind the equipment.
CAUTION
Before you remove the load, ensure that there are no
people in the vicinity.
Stacking a load
–
Carefully drive the machine to the required
location.
–
Raise the forks clearly above the level
where the load is to be placed.
–
Drive the truck forward into the racking.
–
Lower the load until the fork arms are free.
–
Move the forks straight back.
–
Lower the forks again until they are a few
centimetres away from the ground.
DANGER
Personnel must not stand under or near the truck
when the load is in the raised position.
Operation
4
Hydraulic operations
61
50028011505 EN - 03/2022 - 06
Summary of Contents for ECV 10
