Still ECU 15C, Original Instructions Manual

Page: 34 / 78

2
Safety
Basic principles for safe operation
Vibrations
Vibrations to which the hands and arms
are exposed
The following value is valid for all truck models:
• ā
w
< 2.5 m/s
2
NOTE
It is mandatory to specify the hand-arm
vibrations, even where the values do not
indicate any danger, as in this case.
CAUTION
The value expressed above can be used to com-
pare forklift trucks of the same category. It cannot
be used to determine the operator's daily expo-
sure to vibrations during real operation of the truck;
these vibrations depend on the conditions of use
(floor conditions, method of use etc.) and therefore
daily exposure must be calculated using data from
the place of use.
26 1133 801 16 01 EN - 11/2018