15
upwards.
• Check whether the motor protection
filter tray is installed. If not, install it.
• Lock the dustbag to dustbag holder first
and then install it to its seat. Make sure
that the dustbag is properly installed.
Close the top cover.
• Install the flexible hose to the suction
port.
• Install the telescopic tube and
the accessory to the flexible hose
according to the operation you will
perform.
• Use the accessories as per following
for an effective cleaning.
» Main Brush with Pedal is used for
cleaning of surfaces such as carpets,
rugs, parquet, tiles and marble.
» Crevice Nozzle is used for removing
small particles such as dust, crumbs
etc. in narrow areas such as radiators,
drawers, corners etc.
» Telescopic Tube is used for vacuuming
crumbs, hair etc. without installing
any tool on its end.
» Small bursh is used for cleaning of
pillows, mattresses, seat surfaces.
» Turbo Brush is especially used for
effective cleaning of carpets and rugs.
» Hard floor and parquet nozzle is used
on hard floor and parquet.
• Pull the power cord to the desired
length by holding it from the plug and
plug it to the outlet.
• Turn on the appliance by pressing
the on/off button or using the on/off
button on the trigger.
• You may set the suction power as you
desire using the suction power setting
buttons on the appliance.
• When you have completed your work
with the device:
» Turn off the appliance and unplug it
from the outlet.
» Rewind the cord by pressing the cord
rewind button.
Warning! Rewind dry cords only. Dry
the cord before rewinding if it is wet
or humid.
• Insert the main brush with pedall to
the horizontal or vertical park position
cradle together with the tubes and the
hose when the appliance is not used.
• Do not store your appliance outdoors
or in temperatures lower than the
freezing temperature.
• Check the dustbag fill indicator when
you are using your appliance. If
the dustbag fill indicator constantly
displays red:
» Dustbag is full, replace the dustbag.
» Suction tools, tubes or hose may be
blocked, remove the blockage.
• Replacing the dustbag:
» Turn off your appliance and unplug it
from the outlet.
» Remove the flexible hose by pulling
it out of suction port.
» Open the upper cover by pulling the
latch on the front upwards.
» Pull out the dustbag locking tool by
holding it from its latches.
» Remove the dustbag by pulling it
down by holding it from its locking
tool.
» Install a new bag and make sure that
you have placed the bag correctly
to the locking tool. You may procure
new dust bags from our authorized
services.
» Close the top cover.
Warning: Upper cover of the appliance
cannot be closed without installing
a dust bag, do not force it. Install the
dust bag.
V. CLEANING AND MAINTENANCE
• Always unplug the appliance
before starting any cleaning and
