10
INSTRUCTIONS MANUA
L
Thank you for choosing our products. This instructions manual has been
prepared for you to achieve complete satisfaction and maximum performance
from you product.
IMPORTANT SAFEGUARDS
• This device is manufactured in compliance with safety regulations. Usage
against the roles causes harm to person and device.
• Please read the User Manual carefully before operating the device. You will
find important information inside the User Manual regarding mounting, safety,
usage and maintenance. Thus you will both protect yourself and prevent the
device from coming to harm.
• If the power cord is damaged, it must be replaced by the manufacturer or
its service agency or a personnel qualified in the same degree to prevent
a dangerous situation. It must be checked whether there are breaks or
deformations on the heating element present on the device. If glass panels
are damaged, the heater must not be used. Authorized service must be called.
• It must be ensured that the main power is 220-240V AC, 50/60 Hz and the
power line is connected to the fuse. Mains safety must be checked. Fuse must
be 16 Amperes. Your device must be used with grounded socket and grounded
socket must be outside the heater area and the hot surface. Also, it must
be checked whether the socket is loose or damaged. Because loose sockets
damage the device and the power main.
• Your device must not be used connected to the same power cable or fuse with
another device.
• Power cord must not be left on the hot body of the device or near it.
• If your device will not be used for a long period of time, if cleaning or
maintenance will be conducted, the device must be unplugged. It must be
ensured that the device has cooled down.
• The device is not intended for use by persons (including children) with
reduced physical, sensory and mental capabilities or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
the use of the appliance by a person responsible for their safety.
• Definitely do not let your device come into contact with water.
• The electrical connection of the device must ve separated from the mains
during mounting and maintenance or repair works. Device should be
unplugged to be separated from the mains.
• Ensure that the feed cable and the plug is clean and dust-free prior to use.
• Never unplug the feed cable from the plug by tugging on the cable. Ensure
that you hold the plug correctly as you plug it into or take it out of the socket.
Do not touch the feed cable.
• Do not make a joint to the feed cable. Otherwise, malfunction, electric shock
or fire may occur.
• Do not pass the feed cable under heavy objects. Otherwise, electric shock or
fire may occur.
