STIHL TS 400 49
• Pull pick-up body off fuel hose.
• Prise out spout.
Insert manifold so that the straight
edge (1) points towards the
impulse hose (2).
Slide web (1) of holder (2) under the
housing. Press holder down until the
sloping edge (3) engages in slot (4).
Use a new gasket.
Tighten the screws in the two
housing halves with a torque of
7.5 Nm.
- Unscrew filler cap.
• Disconnect chain holding cap.
The parts are reassembled in
reverse order.
• Lever out flange (1) of fuel hose.
• Pull out fuel hose.
- Prise tank vent out of spout.
• Pull out tank vent.
Note:
The straight edge of the hose flange
must rest against the web of the tank
housing.
