STIHL TS 400
19
5.6
Cylinder and piston
5.6.1
Removal
The tabs (1) on the cap must
engage in the guides (2) in the
shroud.
Preparatory steps are described in
chapter 5.5.
• Unscrew spark plug.
• Unscrew the screws of the air
guide cover.
- Remove air guide cover.
The parts are reassembled in
reverse order.
Check that spout for decompres-
sion valve is located correctly on
the shroud.
Set the slide control to "I" before
assembling the shroud.
• Unscrew the cylinder base screws
through the holes in the cylinder.
- Draw cylinder off piston.
• Disconnect hose clip (1) of
manifold (2).
- Slide manifold off intake port.
Note:
A ground lead must be fitted
between the air guide cover and the
housing.
