8.1.2
If the engine is cold
373BA010 KN
373BA011 KN
► Turn the choke knob to
g
.
If the engine is warm
► Turn the choke knob to
e
.
► Also use this setting if the engine has been
running but is still cold.
8.2
Cranking
373BA012 KN
► Place the unit securely on the ground and
make sure that bystanders are well clear of
the nozzle outlet.
► Make sure you have a firm footing: Hold the
unit with your left hand on the housing and put
one foot against the base plate to prevent it
slipping.
► Hold the starter grip with your right hand.
► Pull the starter grip slowly until you feel it
engage and then give it a brisk strong pull.
NOTICE
Do not pull out the starter rope all the way – it
might otherwise break.
► Do not let the starter grip snap back. Guide it
slowly back into the housing so that the starter
rope can rewind properly.
When engine begins to fire
373BA013 KN
If the engine is cold:
► Move the choke knob to
e
and continue
cranking until the engine runs.
If the engine is warm:
► continue cranking until the engine runs.
8 Starting / Stopping the Engine
English
0458-372-0121-C
13
