Stihl SR 200, Instruction Manual

Page: 15 / 84

SR 200
English
13
N
Line up the hose clamp (1) and slip
ring (3):
–
the two lugs (arrow) on the slip ring
face up.
–
The hose clamp's hook faces
outwards.
N
Tighten down the screw (arrow).
Mounting the Control Handle
N
Open up the control handle (1) with
liner (2) and push it over the stub (3)
of the pleated hose.
N
Attach throttle cable to retainer (4).
N
Secure hose with retainer (5) to
third pleat (arrow) in pleated hose.
Mounting the Blower Tube and Nozzle
N
Push the blower tube (1) into the
stub of pleated hose (2) as far as
the stop.
N
Push the nozzle (3) onto blower
tube as far as stop – metering
knob (4) must be in line with the
control handle.
Adjusting and Securing the Control
Handle
N
Put the machine on your back and
adjust the harness – see "Harness".
N
Slide the control handle (1) along
the tube to the most comfortable
position – distance between nozzle
outlet (2) and the control handle (1)
must be at least 500 mm (20 in) (a).
N
Secure the hose clamp (1) with the
screw (3).
3 1
2431BA002 KN
9928BA019 AM
3
2431BA003 KN
1
2
5
4
2431BA004 KN
4
3 2
2431BA005 KN
1
2
2431BA006 KN
a
1
1
2431BA018 KN
3