background image

SP-KM

English

15

Gearhead

Weight

Length

Noise and Vibration Data 

Noise and vibration data measurements 

on power tools with the SP-KM 

KombiTool include idling and rated 

maximum speed in a ratio of 1:6.
For further details on compliance with 

Vibration Directive 2002/44/EC visit 

www.stihl.com/vib.

Sound pressure level L

p

 to ISO 11201

Sound power level L

w

 to ISO 3744

Vibration level a

hv,eq

 to ISO 20643 

The K

-

factor in accordance with 

Directive 2006/42/EC is 2.0 dB(A) for 

the sound pressure level and sound 

power level; the K

-

factor in accordance 

with Directive 2006/42/EC is 2.0 m/s

2

 

for the vibration level.

REACH

REACH is an EC regulation and stands 

for the Registration, Evaluation, 

Authorisation and Restriction of 

Chemical substances.
For information on compliance with the 

REACH regulation (EC) No. 1907/2006 

see www.stihl.com/reach.

Specifications

Gear ratio:

11:1

Forkhead stroke:

20 mm

Strokes per minute at 

10,000 rpm

1)

:

1)

The movement of the rake in one 

direction is a stroke. The up and 

down movement of the rake counts 

as two strokes (= 2 working 

strokes).

1,820/min

KombiTool, complete:

2.0 kg

KombiTool, complete:

1450 mm

KM 55 R with loop handle: 93 dB(A)
KM 56 R with loop handle: 94 dB(A)
KM 85 R with loop handle: 93 dB(A)

KM 90 R with loop handle: 90 dB(A)
KM 94 R with loop handle: 91 dB(A)
KMA 130 R with loop 

handle:

80 dB(A)

KM 100 R with loop 

handle:

90 dB(A)

KM 55 R with loop handle: 105 dB(A)
KM 56 R with loop handle: 106 dB(A)
KM 85 R with loop handle: 105 dB(A)
KM 90 R with loop handle: 102 dB(A)
KM 94 R with loop handle: 106 dB(A)
KM 130 R with loop 

handle:

90 dB(A)

KM 100 R with loop 

handle:

103 dB(A)

Handle, 

left

Handle, 

right

KM 55 R with 

loop handle:

7.0 m/s

2

8.7 m/s

2

KM 56 R with 

loop handle:

8.5 m/s

2

7.7 m/s

2

KM 85 R with 

loop handle:

4.3 m/s

2

6.3 m/s

2

KM 90 R with 

loop handle:

4.9 m/s

2

5.4 m/s

2

KM 94 R with 

loop handle:

6.8 m/s

2

5.3 m/s

2

KMA 130 R with 

loop handle:

4.1 m/s

2

3.2 m/s

2

KM 100 R with 

loop handle:

4.5 m/s

2

5.8 m/s

2

Summary of Contents for SP-KM





















Reviews: