Stihl SP-KM, Instruction Manual

Page: 10 / 20

SP-KM
English
8
Mounting the gearhead
N
Loosen the clamp screws (1) on the
gearhead – do not remove them.
N
Apply a mark (with pencil or crayon)
at distance A (50 mm) from the end
of the drive tube.
N
Push the gearhead (2) onto the
drive tube (3) – turn it back and forth
at the same time – until it reaches or
covers the mark on the drive tube.
Alternative check: The drive tube is
correctly positioned when it completely
closes the slot in the gearhead’s clamp
(short arrows).
N
Line up the center of the gearhead
with the lug (4) on the drive tube –
the STIHL logo facing up.
N
Tighten down the clamp screws on
the gearhead firmly.
Installing the tines
The machine comes standard with 10
tines. Eight tines are fitted and the other
two are spares for maintenance, see
"Inspection and Maintenance by User".
N
Screw the tines (1) into the two
rakes (2) as far as stop – fit all eight
tines on the rakes.
N
Tighten down the tines by hand.
1
414BA007 KN
1
413BA015 KN
A
414BA008 KN
2
3
4
417BA001 KN
414BA010 KN
414BA025 KN
1
2