![background image](http://html1.mh-extra.com/html/stihl/sp-81/sp-81_instruction-manual_1379380029.webp)
28
English
SP 81
Removing and Installing
the Rakes
Removing
:
Use a suitable tool to remove the
chain connector as follows:
Pry off the spring clip (
1
), remove
the tie strap (
2
)
and pull out the
chain connector (
3
).
:
Loosen the locknuts (
4
), unscrew
them from the pivot pin (
5
) and take
off the washers (
6
).
:
Pull out the pivot pin (
5
).
:
Remove the rake.
:
Clean the chain connectors and the
forkhead.
:
Check the condition of the O-rings
and replace them if there are any
signs of damage.
:
Squeeze the tube of STIHL SP
bearing grease to obtain a short
length of grease.
:
Coat each pin with bearing grease.
Installing
:
Assemble and install in the reverse
sequence.
Checking Rake Clearance
:
Close the rakes and set them to
their closest point – the forkhead
should be at the bottom of its stroke.
:
Grip the gullets of the inner tines
and gently squeeze the rakes
together.
:
Measure the distance (
a
) between
the tips of the tines – do not bend
the tines in this process.
Maintenance
3
413BA025 KN
4
5
6
4
6
413BA037 KN