14
English / USA
SP 200
:
Screw the nut (
6
) onto the thread (
3
)
as far as stop.
:
Hold the front end of the drive tube
(
2
) steady with the 36 mm open-end
wrench (
8
) and use the 47 mm
wrench (
7
) to tighten down the nut
firmly.
:
Hold the drive tube at the engine
end steady and rotate the front end
of the drive tube
counterclockwise
(
arrow
) as far as stop.
:
Apply marks (
a, A
) to the front end
of the drive tube and the thin locknut
(
9
) as shown in the illustration.
:
Hold the drive tube at the engine
end steady and rotate the front end
of the drive tube
clockwise
(
arrow
)
as far as stop – about 270°.
:
Apply another mark (
b
) to the
locknut (
9
) opposite the mark (
A
) on
the front end of the drive tube.
7
8
6
411BA007 KN
47 mm
36 mm
2
411BA008 KN
A
411BA009 KN
a
9
411BA010 KN
A
411BA011 KN
b
9
