13
SP 200
English / USA
Preparations
The special harvester may only be
operated with the harness attached.
:
Start the engine – see "Starting/
Stopping the Engine".
:
Put on the harness – see "Fitting the
Harness".
:
Attach the hook (
1
) to a branch. Use
the handle hose (
2
) on the drive
tube to turn the hook to the required
position.
Working Position
:
Use the harness (
3
) to put the hook
under tension while holding the
control handle loosely with your
right hand. The left hand remains
free.
:
With the hook under tension, open
the throttle and begin the shaking
process.
Mounting Front End of Drive Tube
This chapter describes only the
procedure for
first time
mounting –
for subsequent mounting procedure
see chapter on "Transporting the
Machine".
:
Remove the protective caps (
1
)
from the ends of the drive tube (
2
)
and keep them in a safe place.
:
Push the front end of the drive tube,
thread first (
3
), onto the splined
shaft (
4
) an then onto the taper (
5
)
until the nut (
6
) engages the thread.
Using the Unit
2
1
411BA003 KN
411BA004 KN
3
Assembling the Unit
411BA005 KN
1
2
1
2
4
411BA006 KN
3
5
6
