background image

Store the unit in a dry place protected from

frost.

2.7.4

Disposal

Dispose of plant protection chemicals in accord‐

ance with environmental requirements – follow

instructions of chemical manufacturer.
Never dispose of residual plant protection prod‐

ucts or contaminated rinsing solutions in water‐

ways, drains, sewers, street gutters or manholes.

Dispose of residual chemicals and used con‐

tainers in accordance with local waste dis‐

posal regulations.

2.8

Holding and Controlling the

Unit

0000012325_002

Carry the unit on your back with both harness

straps – do not hang it over one shoulder.
Walk slowly forwards as you work – observe the

nozzle outlet at all times – do not walk back‐

wards – risk of stumbling.
Hold the unit upright. To avoid the risk of chemi‐

cal leaking from the tank and causing injury, do

not bend forwards.

271BA003 KN

For emergencies: Practice quickly opening the

fastener on the waist belt (SG 71 only), loosen‐

ing the shoulder straps and setting down the

unit. To avoid damage, do not throw the unit to

the ground when practicing.

2.9

During Operation

Never spray in the direction of bystanders – risk

of injury.
Take special care in slippery conditions – damp,

snow, ice, on slopes or uneven ground.
Watch out for obstacles: Be careful of refuse,

tree stumps, roots and ditches which could

cause you to trip or stumble.
To reduce the risk of accidents, take a break in

good time to avoid tiredness or exhaustion.
Work calmly and carefully – in daylight conditions

and only when visibility is good. Stay alert so as

not to endanger others.
Never work on a ladder or any other insecure

support.
When working in open ground and gardens take

special care to avoid harming small animals.
To reduce the risk of electrocution, never work in

the vicinity of live wires or power cables.
Always clean the sprayer before changing to a

different plant protection product.

2.10

After Finishing Work

Check all parts of the unit for leaks.
After finishing work, thoroughly clean the unit

and wash your hands, face and, if necessary,

your clothes.
Keep other persons and animals away from the

areas that have been sprayed and do not walk

on them until the plant protection chemical has

dried.

2.11

Maintenance and Repairs

Do not attempt any maintenance or repair work

not described in the instruction manual. Have all

other work performed by a servicing dealer.
STIHL recommends that you have servicing and

repair work carried out exclusively by an author‐

ized STIHL servicing dealer. STIHL dealers are

regularly given the opportunity to attend training

2 Safety Precautions and Working Techniques

English

0458-597-0121-C

5

Summary of Contents for SG 51

















Reviews: