background image

► Do not dispose with domestic waste.

17 EC Declaration of Con‐

formity

ANDREAS STIHL AG & Co. KG

Badstr. 115

D-71336 Waiblingen
Germany
declares under our sole responsibility that
Designation:

Sprayer

Make:

STIHL

Series:

SG 51, SG 71

Serial identification number: 4255
conforms to the relevant provisions of Directive

2006/42/EC and has been developed and manu‐

factured in compliance with the following stand‐

ards in the versions valid on the date of produc‐

tion:
DIN EN ISO 19932‑1: 2013,

DIN EN ISO 19932‑2: 2014
Technical documents deposited at:
ANDREAS STIHL AG & Co. KG

Produktzulassung
Waiblingen, 15.07.2021
ANDREAS STIHL AG & Co. KG
pp

Dr. Jürgen Hoffmann
Director Product Certification & Regulatory

Affairs

18 UKCA Declaration of Con‐

formity

ANDREAS STIHL AG & Co. KG

Badstr. 115

D-71336 Waiblingen
Germany
declare under our sole responsibility that
Category:

Sprayer

Manufacturer's brand:

STIHL

Series:

SG 51, SG 71

Serial identification number: 4255

conforms to the relevant provisions of UK regula‐

tions Supply of Machinery (Safety) Regulations

2008 and has been manufactured in compliance

with the following standards in the versions valid

on the date of production:
DIN EN ISO 19932‑1: 2013,

DIN EN ISO 19932‑2: 2014
Technical documents deposited at:
ANDREAS STIHL AG & Co. KG
Done at Waiblingen, 15.07.2021
ANDREAS STIHL AG & Co. KG
pp

Dr. Jürgen Hoffmann
Director Product Certification & Regulatory

Affairs

English

17 EC Declaration of Conformity

14

0458-597-0121-C

Summary of Contents for SG 51

















Reviews: