![background image](http://html1.mh-extra.com/html/stihl/sea-20/sea-20_instruction-manual_1379787043.webp)
0458-006-9621-A
41
English
5 Preparing the hand vacuum for Operation
■ Sharp cleaning agents, cleaning with a water jet or pointed
objects can damage the hand vacuum, the battery and the
charger. If the hand vacuum, the battery or the charger is
not cleaned correctly, components may no longer function
properly or safety devices may be rendered inoperative.
They may cause serious injury to persons.
► Clean the hand vacuum, battery and charger as
described in this instruction manual.
■ If the hand vacuum, the battery or the charger are not
serviced or repaired correctly, components may no longer
function properly or safety devices may be rendered
inoperative. This may result in serous or fatal injury to
people.
► Do not attempt to service or repair the hand vacuum,
battery or charger.
► If the hand vacuum, the battery or the charger require
servicing or repairs: Contact a STIHL servicing dealer
for assistance.
5.1 Preparing the hand vacuum for Operation
The following steps must be performed before commencing
work:
► Ensure that the following components are in safe
condition:
– Hand vacuum,
– Battery,
– Charger,
► Check the battery,
► Fully charge the battery,
► Cleaning the hand vacuum,
► Check the controls,
► If you cannot carry out these steps: Do not use the hand
vacuum and contact your STIHL dealer for assistance.
6.1 Mounting the Charger on a Wall
The charger can be mounted on a wall.
► Check the following points when mounting
the charger on a wall:
– Suitable fixing materials.
– The charger is level.
– The following dimensions are observed:
– a = at least 100 mm
– b = 54 mm
– c = 4.5 mm
– d = 9 mm
– e = 2.5 mm
6.2 Charging the battery
The charging time depends on various factors, e.g. the
battery temperature or the ambient temperature. For
optimum performance, observe the recommended
temperature ranges,
18.6. The actual charging time may
vary from the charging time indicated. The charging time is
indicated at www.stihl.com/charging-times.
5 Preparing the hand vacuum for
Operation
6 Charging the Battery, LEDs
a
0000-GXX-4349-A0
1
2
3
a
b
d
e
e
0000-GXX-8802-A0