background image

17

SE 121, SE 121 E

English

General

Particular safety 
precautions must be 
taken when working with 
the machine. The power 
connection is a particular 
source of danger.

Read all instructions 
before using this 
machine. The following 
safety precautions must 
be observed.

Before starting work, always check that 
your vacuum cleaner is operating 
correctly and is in good condition. Pay 
special attention to the power cable and 
plug.

The machine may only be used by duly 
trained and authorized operators. The 
machine must never be used by 
adolescents.

Keep children, animals and bystanders 
at a safe distance.

The machine may only be operated with 
an undamaged filter element.

Never attempt to pick up 
flammable materials (hot 
ashes, inflammable 
explosive dust, glowing 
cigarettes, etc.) or 
combustible liquids 

(petrol, thinners, etc.).

The machine cannot be used to vacuum 
physiologically harmful dust.

Risk of fire or explosion

Avoid damage to the power cable by 
rolling over, crushing or pulling it.

Never pull the power cable to disconnect 
the plug from the wall outlet. Always 
grasp the plug, never the cable, to 
unplug.

Inspect the power cable regularly for 
signs of damage or ageing. Never use 
the machine if the power cable is 
damaged in any way – risk of 
electrocution.

The main plug must be 
disconnected 
immediately if the power 
cable is damaged – 
electric shocks can kill.

Always remove the paper filter bag and 
check correct operation of the float 
before using the vacuum cleaner to pick 
up liquids or wet materials. Always use 
the filter element.
Stop work immediately and empty the 
container if foam forms.

Never modify your vacuum cleaner in 
any way, as this could be extremely 
dangerous.

Only carry out the maintenance work 
and repairs described in this manual.  
Other work should be performed by your 
STIHL servicing dealer.

Only use original replacement parts.

Always disconnect the plug from the 
power supply (unplug it) before 
performing any kind of work on the 
machine.

The power cable may only be repaired 
or replaced by authorized personnel.

All plugs and connectors for power 
cables must at least be splash-proof.

The machine must be unplugged from 
the power supply before cleaning or 
servicing it and before replacing any 
parts.

Never spray the upper part of the 
vacuum cleaner with water: danger to 
people, risk of short-circuiting.

Important safety 
instructions

Summary of Contents for SE 121
















Reviews: