Stihl RE 150 PLUS, Instruction Manual, Page: 21 / 28

Fault Cause Remedy
The circuit-breaker (fuse) or the earth-
leakage circuit breaker has tripped.
The circuit is electrically overloaded or
defective.
► Find and resolve the cause for the
trip. Engage circuit-breaker (fuse) or
the earth-leakage circuit breaker.
► Switch off other electrical consum‐
ers on the same circuit.
The fuse rating of the socket is too
low.
► Plug the connecting cord into a
socket with the correct fuse rating,
18.1.
The electric motor is too warm. ► Allow the pressure washer to cool
for 5 minutes.
► Clean the nozzle.
The high-pressure
pump switches on
and off repeatedly,
without the trigger of
the spray gun being
pressed.
The high-pressure pump, the high-
pressure hose or the spray attachment
are leaking.
► Ask a STIHL servicing dealer to
check the pressure washer.
The working pressure
fluctuates or drops.
There is a water shortage. ► Open water tap completely.
► Ensure that a sufficient quantity of
water is available.
The nozzle is blocked. ► Clean the nozzle.
The water intake screen or water filter
are blocked.
► Clean water intake screen and water
filter.
The high-pressure pump, the high-
pressure hose or the spray attachment
are leaking or are defective.
► Ask a STIHL servicing dealer to
check the pressure washer.
The water jet has
changed shape.
The nozzle is blocked. ► Clean the nozzle.
The nozzle is worn. ► Replace nozzle.
Additional detergent
is not drawn in.
The detergent container is empty. ► Fill the detergent container with
detergent.
Fan jet nozzle is not turned in direction
- up to the stop.
► Turn fan jet nozzle in direction - up
to the stop.
Venturi nozzle is worn Have the tool repaired by a STIHL
servicing dealer.
Connections on pres‐
sure washer, high-
pressure hose, spray
gun or spray lance
are difficult to con‐
nect to each other.
The connection seals are not lubrica‐
ted.
► Lubricate the gaskets 17.2
17.2 Greasing the gaskets
1
1
1
0000-GXX-9852-A0
► Grease gaskets (1) with grease for fittings.
18 Specifications
18.1 Pressure washer STIHL RE
150 PLUS
Version 230 V / 50 Hz
–
Fuse (characteristic "C" or "K"): 13 A
–
Power consumption: (EU) 2019/1781 §2(2) (j):
2.9 kW
–
Maximum permitted network impedance: 0.32
Ohm
–
protection class: I
–
Degree of of electrical protection: IPX5
–
Working pressure (p): 14 MPa (140 bar)
18 Specifications English
0458-663-0121-C 21