background image

8

English

Cleaning Systems Safety Manual

Do not cover the machine and ensure 
adequate motor ventilation.

Keep the high-pressure cleaner as far 
away as possible from the object being 
cleaned.

The fuel tank may only be filled when the 
machine is switched off and the heat 
exchanger is cold. Do not smoke and 
keep the machine away from naked 
lights.

Switch off the machine before filling with 
fuel.

Ensure that the power cable is not 
damaged by being driven over, 
squashed or pulled, etc.

Never disconnect the machine by pulling 
the cable out of the socket: always grip 
the plug itself!

The power cable and mains plug must 
never be touched with wet hands.

Always unwind the power cable 
completely to prevent any risk of fire due 
to overheating.

Hold the spray attachment firmly with 
both hands in order safely to withstand 
the kickback force and additional torque 
produced when using spray attachments 
with angled spray lance.

Always ensure a firm and safe footing.

Do not touch any of the metal parts 
of the spray attachment and the 
heat exchanger during hot-water 
operation, as this 

may cause serious burns!

Do not bend over the exhaust outlet and 
keep away from the exhaust outlet. 
Do not cover the exhaust outlet. 

Risk of burns and fire!

The voltage and frequency specified for 
the machine (see rating plate) must 
match those of the mains power supply.

Safety device

When the safety device is tripped, any 
impermissibly high pressure will be 
diverted back to the intake side of the 
high-pressure pump via an overflow 
valve.
This safety device is set by the 
manufacturer and must not be adjusted.

Maintenance and repairs

Always disconnect the machine from the 
mains power supply before starting any 
work on the machine.

The machine should be serviced 
regularly. Only carry out the 
maintenance work and repairs 
described in the user manual. 
All other work should be entrusted 
to a servicing dealer.

STIHL recommends that all 
maintenance and repairs be carried 
out by a STIHL dealer. STIHL dealers 
regularly attend training courses and are 
supplied with the necessary technical 
information.

Only use high-quality replacement parts, 
otherwise accidents may occur or the 
machine may be damaged. Contact your 
local dealer if in doubt.

STIHL recommends the use of genuine 
STIHL replacement parts, as these are 
optimally adapted to the machine and 
the needs of its user.

The power cable may only be repaired 
or replaced by authorized and qualified 
electricians.

Summary of Contents for Plus se 121
















Reviews: