![background image](http://html1.mh-extra.com/html/stihl/mse-250-c/mse-250-c_instruction-manual_1378796034.webp)
for operations different than intended could
result in a hazardous situation.
32.7
Causes and operator preven‐
tion of kickback:
Kickback may occur when the nose or tip of the
guide bar touches an object, or when the wood
closes in and pinches the saw chain in the cut.
Tip contact in some cases may cause a sudden
reverse reaction, kicking the guide bar up and
back towards the operator.
Pinching the saw chain along the top of the
guide bar may push the guide bar rapidly back
towards the operator.
Either of these reactions may cause you to lose
control of the saw which could result in serious
personal injury. Do not rely exclusively upon the
safety devices built into your saw. As a chain
saw user, you should take several steps to keep
your cutting jobs free from accident or injury.
Kickback is the result of tool misuse and/or incor‐
rect operating procedures and can be avoided by
taking proper precautions as given below:
–
Maintain a firm grip, with thumbs and fingers
encircling the chain saw handles, with both
hands on the saw and position your body and
arm to allow you to resist kickback forces.
Kickback forces can be controlled by the oper‐
ator, if proper precautions are taken. Do not let
go of the chain saw.
–
Do not overreach and do not cut above shoul‐
der height. This helps prevent unintended tip
contact and enables better control of the chain
saw in unexpected situations.
–
Only use replacement bars and chains speci‐
fied by the manufacturer. Incorrect replace‐
ment bars and chains may cause chain break‐
age and/or kickback.
–
Follow the manufacturer's sharpening and
maintenance instructions for the saw chain.
Decreasing the depth gauge height can lead
to increased kickback.
English
32 General Power Tool Safety Warnings
34
0458-764-0121-B