background image

Pitch

Drive link

gauge/groove

width

Length

Guide bar

Nose

sprocket

teeth

Number of

drive links

Saw chain

50 cm

Rollomatic E

11

72

36 RD3 (Type

3683)

Rollomatic ES
Rollomatic ES

Light

Duromatic

-

55 cm

Rollomatic ES

11

76

Duromatic

-

63 cm

Rollomatic E

11

84

Rollomatic ES
Rollomatic ES

Light

Duromatic

-

71 cm

Rollomatic ES

11

91

Rollomatic ES

Light

75 cm

Duromatic

-

98

80 cm

Rollomatic ES

Light

11

105

90 cm

Rollomatic ES

Light

11

114

The cutting length of a guide bar depends on the chainsaw and the saw chain being used. Actual cut‐

ting length may be less than the specified length

21 Spare Parts and Accesso‐

ries

21.1

Spare parts and accessories

These symbols indicate original STIHL

spare parts and original STIHL acces‐

sories.

STIHL recommends the use of original STIHL

spare parts and accessories.
Despite ongoing market observation, STIHL is

unable to judge the reliability, safety and suitabil‐

ity of other manufacturers' spare parts and

accessories; accordingly, STIHL cannot warrant

for the use of those parts.
Original STIHL spare parts and original STIHL

accessories are available from STIHL dealers.

22 Disposal

22.1

Disposing of Chainsaw

Information on disposal is available from STIHL

servicing dealers.

► Dispose of the chainsaw, guide bar, saw

chain, fuel mix, gasoline, two-stroke engine oil,

accessories and packaging in accordance with

local regulations and environmental require‐

ments.

23 EC Declaration of Con‐

formity

23.1

STIHL MS 500i Chainsaw

ANDREAS STIHL AG & Co. KG

Badstrasse 115

D-71336 Waiblingen
Germany
declare in exclusive responsibility that

Category: Chainsaw

Make: STIHL

Model: MS 500i, MS 500i W

Serial identification: 1147

Displacement: 79.2 cc

conforms to the relevant provisions of Directives

2011/65/EU, 2006/42/EC, 2014/30/EU and

2000/14/EC and has been developed and manu‐

factured in compliance with the following stand‐

ards in the versions valid on the date of produc‐

tion: EN ISO 11681‑1, EN 55012 and

EN 61000‑6‑1.

21 Spare Parts and Accessories

English

0458-809-0121-B. VA0.A21.

27

Summary of Contents for MS 500i

































Reviews: