MS 362
English
31
N
Push the hand guard (1) forward –
the chain is locked.
N
Press down the trigger lockout (2)
and pull the throttle trigger (3) at the
same time. Set Master Control
lever (4) to:
Choke shutter closed (
l
)
–
if the engine is cold (also use this
position if the engine stopped when
you opened the throttle after
starting)
Starting throttle position (
n
)
–
if the engine is warm, i.e. if it has
been running for about one minute.
N
Hold and start your saw as
described.
When engine begins to fire
N
Set the Master Control lever (1) to
the starting throttle position (
n
).
N
Press the button to open the
decompression valve.
N
Hold and start your saw as
described.
As soon as the engine runs
N
Press down trigger lockout and the
blip the throttle trigger (2) – the
Master Control lever (1) moves to
the run position (
F
) and the engine
settles down to idling speed.
N
Pull the hand guard back toward the
front handle.
The chain brake is now disengaged –
your saw is ready for operation.
NOTICE
Always disengage chain brake before
accelerating the engine. High revs with
the chain brake engaged (chain locked)
will quickly damage the clutch and chain
brake.
At very low outside temperatures
N
Allow engine to warm up at part
throttle.
N
Change over to winter operation if
necessary – see “Winter Operation”.
Stopping the engine
N
Move the Master Control lever to the
stop position (0).
If you have moved the Master Control
lever from the starting throttle
position (
n
) to the stop position (0) –
depress the trigger lockout and throttle
trigger at the same time.
1
4
3
2
0001BA021 KN
0
1
0001BA022 KN
STOP
0
1
2
0001BA023 KN
STOP
0
001BA186 KN
