![background image](http://html.mh-extra.com/html/stihl/ms-251/ms-251_instruction-manual_1378777046.webp)
MS 251, MS 251 C
English
44
Thorough filter cleaning
N
Wash the filter in STIHL special-
purpose cleaner (special
accessory) or a clean, non-
flammable cleaning liquid (e. g.,
warm soapy water) – rinse the filter
from inside to out under a water jet
– do not use high-pressure cleaners
N
Dry all filter parts – do not expose to
extreme heat
N
Do not oil the filter
N
Reinstall filter
Installing the air filter
N
Fit air filter
N
Press the air filter in the direction of
the filter housing and
simultaneously turn it clockwise
until the air filter engages – the
"STIHL" logo must be horizontal
N
Fit the shroud – see "Shroud"
Exhaust emissions are controlled by the
design of the fundamental engine
parameters and components (e.g.
carburation, ignition, timing and valve or
port timing) without the addition of any
major hardware.
Basic information
The carburetor comes from the factory
with a standard setting.
The carburetor has been adjusted for
optimum performance and fuel
efficiency in all operating states.
Standard setting
N
Switch off the engine
N
Check the air filter – clean or replace
it if necessary
N
Turn the high speed adjusting
screw (H) counterclockwise as far
as possible (max. 3/4 turn)
N
Turn the low speed adjusting
screw (L) clockwise until it is firmly
in its seat – then back off 1/4 turn
Setting the idle speed
N
Make standard setting
N
Start engine and let it warm up
2710BA001 KN
2.
1.
Engine Management
Adjusting the Carburetor
2310BA027 KN
Summary of Contents for MS 251
Page 2: ...Instruction Manual 1 61 Manual de instrucciones 62 127 ...
Page 130: ...MS 251 MS 251 C español EE UU 128 ...
Page 131: ......